Personal care, car care, home care products
NAME:Tire Sealer & Inflator - Effective instant flat tire repair tool

I. Specifications



Capacity (ml)


Item No.


Can Size (mm)


Content net weight (g)


II. Main Features

1. Non-toxic and odorless. 

2. No corrosion and no damage to the tire. Prolong the shelf life of the tire. Good Anti-aging effect.

3. Effectively cool the hot tyre when running in high speed.  

4. Easy-to-use. No need to dismantle or change tire when it is punctured, just spray it into the tire directly.

5. Seal automatically and quickly to prevent the air leakage, it can cover the breach within 6mm.

General Introduction

This LATOP Tire Sealer & Inflator is designed to quickly seek out and effectively seal most normal punctures and slow leaks on your tires. It is 100% applicable to breach within 6 m on tubeless rubber tyres of cars, motorcycles and electrical bicycles. Neither jack nor tyre-undo is needed. One step procedure of tyre bumping and repairing is finished in seconds. 

This tire fix can also be filled into new tyres to prevent unexpected leakage. It also has the function to work as a small fire extinguisher. It can effectively cool the hot tyre when running in high speed. 

It is non-toxic and odorless. It won’t cause corrosion or damage to the tire.

Product Photo

flat tire repair

 tire inflator

tire fix, tyre fitting

New Design

How to Use

You can refer to the video here or follow the following steps.

1) Shake the bottle for a few seconds to increase the pressure inside of the cans.

using steps-1.jpg



2) Take off the valve cap of the leaking tire.

using steps-2.jpg



3) Connect the Latop Tire Sealer and Inflator with it. 

 using steps-3.jpg



4) Remove the valve protection cap of  Latop Tire Sealer and Inflator and press the valve to start sealing and inflating.

using steps-4.jpg



5) After saturated inflation, take the connection valve gently and put the cap on the tire. 

 using steps-5.jpg



6) To have the best effect, pls start the car and drive for 2-3 seconds immediately after sealing and inflation to evenly spread the liquid inside of the tire.


1. Clear the pointed objects on the tyre. Deflate the tyre; Shake the can well before use; It will not affect its function even the object can not be cleared away.
2. Turn the valve of tyre upwards and empty the tyre. Shake the can well, and then screw one and of the tube to the tyre valve, the other end to this can nozzle. Put the can upside down, and then press the nozzle down.

3. Screw connecting tube firmly onto tyre valve; Hold the can upright-button uppermost-remove protector cap-press button until tyre appears firm.

4. After bumping is finished, disconnect both ends of the tube. Immediately drive 3-5km to allow the sealer to spread in tyre and mend the puncture. Then check and adjust tyre pressure. Drive 1-2km and the punctures will be bonded.


1. Keep away from heat, flame, spark and other source of ignition.

2. Store in a cool, dry place (45C); Avoid direct sunlight.

3. Do not clash, puncture, or incinerate the can.

4. Keep out of reach of children.


This product can be widely used for a wide range of places. 

Other Related Products

We’re an experienced manufacturer from China and we have a variety of related products for your reference. Here below are some of them. Please don’t hesitate to tell us your requirements, and we’ll quote you the most competitive price!

Non-flammable Tire Sealer & Inflator 

(Can be used as a small fire extinguisher)

Please feel free to contact us for any problem!

About us / Products / News / YAC Mall / Contact us / Site Map
Copyright @ 2013 Yac Chemicals Limited. All Rights Reserved.
Providing high-quality products for Personal Care, Home Care, Car Care, Industrial Care & Party Celebration!